D-K Manufacturing Corporation
NTSA Precision

D-K Manufacturing Corporation: Stamping with Tool & Die Design & Manufacturing Support

(Click on thumbnail to enlarge)

Stamping Aida
Stamping Aida
Stamping Aida

D-K Mfg. Corp. was founded in 1941 and has maintained a firm commitment to quality and craftsmanship and is on it's forth generation ownership. Combining our creative designers, our NY State certified tool and die makers, our well trained and informed set up personnel and operators, and a continued commitment to update our equipment, places us in a very competitive position.
At D-K we consider ourselves a "full service" tooling and manufacturing facility. We have the capabilities to approach your program from concept and prototyping through final design to permanent tooling. Our creative office staff and ERP order entry system track all orders for real time data for just in time deliveries and Kan Ban shipments on a daily or weekly program. D-K can even run your progressive/draw dies if they need a home.

D-K has great experience in prototype and sort run stampings. The sort run method at D-K has a shorter lead time, ideal for faster delivery of projects that have been started to late, taking to long, or just don't require high volume production but the piece price needs to be low. In many cases short run stampings utilize the prototype tooling to produce parts before a progressive die can be built. This also is the way to go when it is not possible to invest in a large progressive die. Volumes can range from a few hundred parts to a few thousand.

  • Production stamping presses from 5 to 175 tons.
  • Secondary assembly operations, pem nuts and studs installed
  • Short-run and large quantity production runs.
  • SPC trained operators and inspectors.
  • Feed lines available on most presses, hand fed strips for sort run production, air feed arms for secondary operations
  • Coil feed capacity from .008" to .135" thk x .500" to 18" wide.
  • Coil size capacity up to 48" O.D.x 16" min. I.D. and 2,000 lbs. max coils
  • Press capacity bed up to 48" x 72"; 7.87" stroke and a shut height of 17".
  • PPAP's paper work when required, ISO compliant, CMM inspection, New York State apprentice program for tool and die maker and machinist.
  • Quality at D-K, each operator assumes quality responsibility for the inspection of their own work.
  • Our Quality Manual defines the stringent procedures and systems that enable us to meet your requirements.
  • Tool designers, operators and inspectors continue training in GD&T, SPC and lean practices.



General Capabilities
  • Bulk
  • Contract Manufacturing
  • Custom
  • Production runs short or long
  • Prototype
  • Kan Ban
Industry Focus
  • Agricultural
  • Automotive
  • Appliance
  • Communications
  • Construction
  • Electrical
  • Furniture
  • Medical
  • Military
  • Motor
  • Pump (Fluid)
  • Telecommunications
Customer List
  • ITT Corporation
  • Faradyne Motors of China
  • Birds Eye
  • Davis Standard
  • Prince and Izant Company
Press Rating
  • 175 tons
  • metric tons
Maximum Press Stroke
  • 9 in
Maximum Press Bed Length
  • 10 in to 72 in
Maximum Press Bed Width
  • 12 in to 48"
Part Diameter




12 in

Part Thickness



  • 0.008 in




  • 0.135 in


Tolerance (+/-)
  • 0.005 in
Industry Standards
  • ISO - Compliant
  • International Organization for Standardization
Production Method
  • Coining
  • For complex geometric shapes, squeezes the metal between two dies
  • Continuous
  • Is a continuous stamping process where the stamping function continues until the press is shut down.
  • Continuous Strip
  • Drawn
  • Allows flat sheet metal to be turned into 3-D shapes
  • Progressive Die
  • The raw stock is fed into a single die that has 2 or more stamping functions.
Production Capabilities
  • Bulk
  • Complex
  • Heavy Gauge
  • High Strength
  • High Volume
  • Long Run
  • Mass Volume Parts
  • Medium-To-Large


  • Short Run
  • Small
  • Thin Gage
  • Thin Wall
Production Volume


  • 1 units


  • 1,000,000 units
  • Specialty Production Shop
  • Prototype
  • Low Volume
  • Small Run
  • High Volume
  • Large Run
  • Long Run
  • Large Scale Production Volume Run
  • Stainless Steel
  • Hot Rolled Steel
  • Cold Rolled steel
  • Aluminum
Stamping Product
  • Connectors
  • Electronic Connectors
  • Pump bases
  • Motor bases
  • Mounting Brackets
  • End Caps
  • Filter Components
  • Furniture Brackets
  • Hardware
  • Insert Moldings
  • Medical pump brackets
  • Perforated metal Strainers
  • Fluorescent Reflectors
  • Receiver Dryer Brackets
  • Drawn Shapes
  • Speaker Covers
  • Klip Rings
  • Thrust Washers
  • Transfer Stampings
Stamping Features
  • Coated
  • Countersunk
  • Cruciform
  • Embossed
  • Enameled
  • Flat
  • Heat Treated
  • Numbering
  • Ornamental
  • Shape Critical
  • Strain Relief
  • Surface Critical
  • Tapped
  • Threaded
Additional Services Provided
  • Assembly
  • Consulting
  • Deburring
  • Design
  • Heat Treating
  • Plating
  • Packaging
  • Powder Coating
  • Rivet
  • Stress Relieving
  • Swaging
  • Tapping
  • Trimming
  • Welding
File Formats
  • AutoCAD (DWG,DWZ)
  • BMP (Bit Mapped Graphics)
  • DXF (Drawing Interchange Format, or Drawing Exchange Format)
  • GIF (Graphics Interchange Format)
  • IGES (Initial Graphics Exchange Specification, ANSI file format.)
  • JPG or JEPG (Joint Photographic Experts Group)
  • MasterCam (MDX, MC8, MC9, SET)
  • PDES (Product Data Exchange using STEP, Standard for the Exchange of Product Model Data. A standard format for exchanging data between)
  • Advanced CAD and CAM programs.
  • PDF (Portable Document Format)
  • Pro-E or Pro/Engineer (DRW,PRT,XPR)
  • STEP (Standard for the Exchange of Product Model Data)
  • TIFF (Tagged Image File Format)

^ Back to top

Privacy  |  Sitemap  |  Site created by ThomasNet Web Solutions